Control stops in flush valves will fail over time. With traditional flush valves, replacing the Control Stop requires turning off the water to the bathroom, a hall or floor, and sometimes the entire building. This is inconvenient and costly.
Fixing a control stop can be very challenging in these old buildings. We often have to shut down the water to a riser line, affecting multiple floors. This requires the work to be done at night or on weekends. Sometimes we have to call in DOE plumbers which makes what should be a simple fix into very expensive and time consuming project.
- NYC School Building Engineer
The Delany TruStop with patented ball valve design fits right to the flush valve, which allows for easy water shutoff at the stop in order to replace the failed back check.
The TruStop is a patented innovation poised to reduce the cost of maintenance for institutional water closets, toilets, and urinals. We at The Part Works carry both the 3/4" TruStop control stop for urinals and the 1" TruStop control stop for water closets. Trust us to provide you with top-quality products that will meet your needs.
• No need to shut off water to the entire restroom or worse
• Turn the water off at the source for easy and fast replacement of theTruChek
• Designed to fit any manufacturer valve
• Longer life means less frequent maintenance
• No need for HEPA containment tents in hospitals
• Vandal Proof